Heating Cable for Pipe of GS and CE

Heating Cable for Pipe of GS and CE

 Senphus Heating Cable for Pipe  has passed CE,GS  certificate.

Heating Cable for Pipe Characteristics:

• The heating cable can prevent the freeze of the pipe and enable water to flow normally below 0°C
• The heating cable uses thermostat to save energy.
• The heating cable is suitable for the metal tube or the water filled plastic pipe.
• The installation of the heating cable is easy and you can install it by yourself in accordance with the installation and use instruction.
• The heating cable is safe and the life is long.

 Maintenance of the required temperature in pipes

Water lines and process pipe systems can become a real problem when temperatures drop below freezing. It's only when the thaw comes that you realize the damage a split or cracked water pipe can cause.

Water Pipe Heating Cable provides a reliable heating solution to the problem of frozen pipe.

Water pipe heating cables prevent frost damages and keep liquids floating at all outside temperatures.

 It incorporates a patented splice, insulated cover and a metal clad sheath to ensure product longevity.

The cable is available in a variety of voltages ranging, making it ideal for any residential, commercial or heavy industrial application.

 Installation:

1. first unwind the heating cable. The cable must never be connected to the power line when it is wound up.
2. if the cable is too inflexible because of low temperatures, unwind it and put it for some minutes into the plug.
3. afterwards you can pass the cable.
4. the area around the pipe where you want to connect it with the cable must be accessibly and non-attached.
5. the heating cable can not be passed behind walls
6. put the thermostat with the round black contact area tightly on the coolest point of the pipe and fix it with insulating tape.
7. finally put the whole cable on the pipe and fasten it every 30~60cm with insulating taple.
8. attention: the cable must be fastening straight on the pipe
9. now you can check if your cable works.
10. afterwards insulate the water pipe and the heating cable with mineral rock wool or foam. Attention: never use more than 13mm of this material to insulate.
11. in general the heating cable must be protected against mechanical damage or biting.
12. the heating cable can not be put into liquids.
13. finally plug the cable into a 230V main plug.
14. 

Packaging

Anti-freeze water pipe heating cable of GS Certification: